September 4th-September 7th 2012
Torino, Italy

ESPS 2012 PLANNING

(Download full program)

Tuesday Sept. 4th

Welcome Reception (6 - 8 pm) at Castello del Valentino
Politecnico
Viale Mattioli, 39 Torino

The conference site will be at Aula Magna Lingotto
Politecnico di Torino
Via Nizza, 230

Wednesday Sept. 5th

9.00-9.30	Two-stage reactive (dual-cure) polymer systems Bowman Christopher University of Colorado, Boulder, USA
9.30-10.00	Halogenated (meth)acrylates as initiators for photopolymerization reactions Scherzer Tom Leibniz Institute of Surface Modification, Leipzig, Germany
10.00-10.30	Functional nanogels as photopolymer modifiers and as precursors to polymeric networks Stansbury Jeffrey University of Colorado, Boulder, USA
10.30-11.00	BREAK
11.00-11.30	Overcoming oxygen inhibition in free radical photopolymerization: characterization and methods Allonas Xavier University of Haute-Alsace, Mulhouse, France
11.30-11.50	Effect on oxygen species reactive on the kinetic of free radical photopolymerization Pynaert Remy University of Haute-Alsace, Mulhouse, France
11.50-12.10	Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR Ligon Samuel C. Vienna University of Technology, Vienna, Austria
12.10-12.30	Dye-linked photoinitiators for visible light radical photopolymerization Kawamura Koichi University of Haute-Alsace, Mulhouse, France
12.30-12.50	Silicon-based waveguides via two-photon induced thiol-ene polymerization Wutzel Harald Vienna University of Technology, Vienna, Austria
12.50-14.30	LUNCH
14.30-15.00	Thiol-ene polymerization of biocompatible photopolymers Liska Robert Vienna University of Technology, Vienna, Austria
15.00-15.30	Photopolymerization of biobased monomer systems Johansson Mats KTH Royal Institute of Technology, Stockholm, Sweden
15.30-16.00	Current challenges of photopolymerization for dental materials Moszner Norbert Ivoclar-Vivadent-AG, Schaan, Liechtenstein
16.00-16.30	BREAK
16.30-17.00	Biobased UV-curable monomers for coatings applications Scoponi Marco Università di Ferrara, Ferrara, Italy
17.00-17.20	Fluorescent probes for monitoring photopolymerization reactions of acrylics and processes in polymerized formulations Bosch Paula Institute of Science and Technology of Polymers -CSIC, Madrid, Spain
17.20-17.40	Photopolymerizations of (bis)phosphonated-bis(methacrylamide)s for dental applications Avci Duygu Chemistry Bogazici University, Istanbul, Turkey
17.40-18.10	Photo-induced conversion of silazanes into Si-O Si-O networks Prager Lutz Leibniz Institute of Surface Modification, Leipzig, Germany

Thursday Sept. 6th

9.00-9.30	UV-curable nanocomposites and nanostructures: processing and functional analyses LeTerrier Yves Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
9.30-10.00	Nanocomposites by UV driven sol-gel process and photopolymerization Croutxe-Barghorm Céline University of Haute-Alsace, Mulhouse, France
10.00-10.20	In-situ graphene oxide reduction during Uv-photopolymerization of graphene oxide/acrylic resin mixtures Fabbri Paola Università di Modena e Reggio Emilia, Modena, Italy
10.20-10.40	UV cured hybrid sol-gel coatings for corrosion protection of aeronautical metallic substrates Moreau Nadia University of Haute-Alsace, Mulhouse, France
10.40-11.10	BREAK
11.10-11.40	Novel hybrid and two-phase materials obtained by photopolymerization Andrzejewska Ewa Poznan University of Technology, Poznan, Poland
11.40-12.10	Photocured hybrid inorganic/metal/organic networks Cook Wayne Monash University, Clayton, Australia
12.10-12.30	Design of functional NIR-photoinitiator systems for imaging and coating applications Strehmel Bernd University of Applied Sciences, Krefeld, Germany
12.30-14.00	LUNCH
14.00-14.30	Photopolymerization in solid state Nie Jun Beijing University of Chemical Technology, Beijing, China
14.30-15.00	Photopolymerization in lyotropic liquid crystal templates for development of polymer nanostructures Guymon C. Allan University of Iowa, Iowa City, USA
15.00-15.30	Synthesis and properties of photocrosslinkable telechelic diacrylate poly(vinylidene fluoride-co-perfluoromethylvinyl ether) copolymers Ameduri Bruno Ecole Nationale Supérieure de Chimie de Montpellier, Montpellier, France
15.30-15.50	Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells Kellner Michael Vienna University of Technology, Vienna, Austria
15.50-16.10	3D optical waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional groups Kern Wolfgang Montanuniversität Leoben, Leoben, Austria
16.10-16.30	Advantages and limitations in the use of photopolymerization for prototyping microfluidic structures Turri Stefano Politecnico di Milano, Milano, Italy
16.30-18.30	BREAK AND POSTER SESSION
20.00-24.00	SOCIAL DINNER

Friday Sept. 7th

9.00-9.30	Synthesis and use of supramolecular crown ether-diaryiodonium salt complexes in photoinitiated cationic polymerization Crivello James V. Rensselaer Polytechnic Institute, Troy, USA
9.30-9.50	Synergistic effect of water and polyol on the cationic UV-curing of cyclohexyl epoxides Soucek Mark D. University of Akron, Akron , USA
9.50-10.20	Kinetic and microstructural aspects of radiation-initiated cationic polymerization of epoxies Coqueret Xavier Université de Reims Champagne Ardenne, Reims, France
10.20-10.50	BREAK
10.50-11.10	Photoacid and photobase generating monomers – Photochemistry and application to UV imprint materials Shirai Masamitsu Osaka Prefecture University , Osaka, Japan
11.10-11.30	Cationic photopolymerization of epoxy resins: optimization by experimental design Tataru Gabriela Université de Reims Champagne-Ardenne, Reims, France
11.30-12.00	The future of radiation curing. Challenges and answers Dietliker Kurt Swiss Federal Institute of Technology Zurich, Zurich, Switzerland
	CLOSING REMARKS

	POSTER SESSION
1	Large area micro-structuring of viscous drag reducing riblets by roll-to-roll-UV-imprint-lithography Nees Dieter Joanneum Research GmbH, Weiz, Austria
2	Synthesis and characterization of novel bio-compatible, bio-degradable and photocurable polymeric materials for soft and hard tissue engineering applications Romano Ilaria Istituto Italiano di Tecnologia, Genova, Italy
3	Spectroscopic and dynamic investigation of the polymerization inhibition process for sub-diffraction lithography Dallari William Istituto Italiano di Tecnologia, Genova, Italy
4	Ferrocenium salts and N-methyl pyrrolidone-A new visible light bimolecular photoinitiator system for free radical polymerization Li Zhiquan Vienna University of Technology, Vienna, Austria
5	Rheological and photo curing behavior of an acrylated hyperbranched polymer composite containing magnetic responsive nanoparticles Nardi Tommaso Ecole Polytechnique de Lausanne, Lausanne,Switzerland
6	UV-curable hybrid nanocomposites for light trapping textures in solar cells Gonzalez Lazo Marina A. Ecole Polytechnique de Lausanne, Lausanne, Switzerland
7	Photocured POSS-containing polymethacrylates Marcinkowska Agnieszka Poznan University of Technology, Poznan, Poland
8	Two-component photocurable materials containing octasubstituted polyhedral oligomeric silsesquioxanes Przadka Dawid Poznan University of Technology, Poznan, Poland
9	Photoinitiator-free UV curing of acrylate-based nanocomposites Bauer Frank Institute of Chemical Technology, Leipzig, Germany
10	Molecular modeling of primary processes by photo- and electron- induced polymerization Naumov Sergej Universitat Leipzig, Leipzig, Germany
11	Photoinduced preparation and patterning of multilayer mesostructured n-alkylsiloxane hybrid films Ni Lingli Université de Haute Alsace, Mulhouse, France
12	Photoinduced crosslinking of epoxide/thiol system catalyzed by superbase generation Salmi Hanene Université de Haute Alsace, Mulhouse, France
13	Panchromatic type II photoinitiator based on thioxanthone Tar Haja Université de Haute Alsace, Mulhouse, France
14	Characterization of UV cured polymeric networks using direct pyrolysis GC-MS Belbakra Zakaria Université de Haute Alsace, Mulhouse, France
15	Elaboration of mesoporous silica thick films by a photosol-gel process De Paz-Simon Heloise Université de Haute Alsace, Mulhouse, France
16	A study on the water repellence of acrylic photopolymers containing fluorinated monomers El Fouhaili Bandar Université de Haute Alsace, Mulhouse, France
17	Self initiated photopolymerization in acrylate miniemulsion Jasinski Florent Université de Haute Alsace, Mulhouse, France
18	The effect of UV stabilizers on polymerization under UV and visible light: characterization by RT FTIR and confocal RAMAN spectroscopy Karasu Feyza Université de Haute Alsace, Mulhouse, France
19	Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization Li Zhiquan Vienna University of Technology, Vienna, Austria
20	Stereolithography with hierarchical polymers based on high internal phase emulsions Ligon Samuel C. Vienna University of Technology, Vienna, Austria
21	Proton conducting fluorinated polymer nanomembrane for fuel cell applications Kellner Michael Vienna University of Technology, Vienna, Austria
22	Ionic liquids for radical photopolymerization Wutzel Harald Vienna University of Technology, Vienna, Austria
23	New monomers based on vinylcarbonates for biomedical applications Wutzel Harald Vienna University of Technology, Vienna, Austria
24	A straightforward synthesis and structure-property relationship of highly efficient two-photon photoinitiators for 3D microfabrication Li Zhiquan Vienna University of Technology, Vienna, Austria
25	3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction Li Zhiquan Vienna University of Technology, Vienna, Austria
26	Water soluble initiators for two-photon polymerization Li Zhiquan Vienna University of Technology, Vienna, Austria
27	Photochemical cross-linking of natural rubber latex: a new approach of manufacturing non-allergenic latex-gloves Kern Wolfgang Montanuniversität Leoben, Leoben, Austria
28	Hybrid photopolymerization of epoxy and acrylate monomers derived from fatty esters – Control of competitive processes by experimental design Tataru Gabriela Université de Reims Champagne-Ardenne, Reims, France
29	Keratin-based coatings obtained by photopolymerization of thiol-ene systems Colucci Giovanna Politecnico di Torino, Turin, Italy
30	Photoluminescent epoxy-GD₂O₃:Eu³⁺ UV-cured nanocomposites Roppolo Ignazio Politecnico di Torino, Turin, Italy
31	UV-activated hydrosilation reaction for silicone polymer crosslinking Marchi Sophie Politecnico di Torino, Turin, Italy
32	Polymeric coated metal oxide and metal nanoparticles for biomedical applications Amici Julia Politecnico di Torino, Turin, Italy
33	Water and oil repellent finishing of textiles by UV-grafting Periolatto Monica Politecnico di Torino, Turin, Italy
34	Cotton fabrics functionalized by chitosan UV-grafting for removal of dyes from wastewater Periolatto Monica Politecnico di Torino, Turin, Italy
35	Surface modification of UV-cured epoxy resins with fluorescent sensors, through consecutive photopolymerization-click chemistry reactions Medel Sandra Institute of Science and Technology of Polymers CSIC, Madrid, Spain
36	UV-cured tunable materials: preparation, characterization and investigation of photocatalytic activity of new hybrid materials Calza Paola Università degli Studi di Torino, Turin, Italy
37	Different toughening agents for UV-cured epoxy systems Naguib Mohamed Politecnico di Torino, Turin, Italy
38	Dendritic polymers as unmatched versatile modifiers for UV-cured epoxy resins Foix David Politecnico di Torino, Turin, Italy
39	Photopolymerization of MMA under UV pulsed laser irradiation with TiO2 nanorods as initiator Farina Duilio Istituto Italiano di Tecnologia, Genova, Italy
40	Photopolymerized coatings with antibacterial properties Lisanti Clara Politecnico di Torino, Turin, Italy
41	Surface patterned amphiphilic perfluoropolyether/poly(ethylene glycol) networks as high-performance antifouling coatings Vitale Alessandra Politecnico di Torino, Turin, Italy
42	A new photo-crosslinked polymer electrolyte for dye-sensitized solar cells optimized by design of experiment Bella Federico Istituto Italiano di Tecnologia, Turin, Italy
43	Studies of HABI-derivates in the presence of different donors Strehmel Veronika University of Applied Sciences, Krefeld, Germany
44	Photo-cured epoxy networks reinforced with titania in-situ generated by means of non-hydrolytic sol-gel process Messori Massimo Università di Modena e Reggio Emilia, Modena, Italy
45	Uv-curing: an efficient and versatile tool for synthesizing polymer electrolytes for li-based batteries Nair Jijeesh R. Politecnico di Torino, Turin, Italy
46	Antimicrobial finishing of textiles by chitosan uv-grafting Periolatto Monica Politecnico di Torino, Turin, Italy
47	New formulation for combined uv/thermal curing of highly filled composite manufactures Di Gianni Anna ABB Switzerland Ltd Corporate Research, Baden-Dättwill, Switzerland
48	Simultaneous in situ graphene oxide reduction and UV curing of acrylic based formulations for inkjet printing Giardi Rossella Istituto Italiano di Tecnologia, Turin, Italy
49	From cell-repulsive to cell-adhesive behavior of commercial substrates photochemically functionalized Mescola Andrea Istituto Italiano di Tecnologia, Genova, Italy
50	Graphene based nanocomposites for pressure sensors Giardi Rossella Istituto Italiano di Tecnologia, Turin, Italy
51	Silver based composites for pressure sensors Giardi Rossella Istituto Italiano di Tecnologia, Turin, Italy
52	UV curing systems using 172 nm excimer lamps Riedel Carsten Innovative Oberflächentechnologien GmbH, Leipzig,Germany
53	Shrinkage determination of UV-cured acrylates using photorheology Schmidt Christian Leibniz Institute of Surface Modification, Leipzig, Germany
54	Silica nanoparticles bearing a photoreactive shell Riess Gisbert Montanuniversität Leoben, Leoben, Austria
55	Cross-linking of a ROMP derived polymer using the thiol-ene reaction: towards the fabrication of polymer 2D- and 3D- microstructures Griesser Thomas Montanuniversität Leoben, Leoben, Austria
56	Microstructure characterization of aromatic epoxy resin networks cationically cured by radiation Ranoux Guillaume Université de Reims Champagne-Ardenne, Reims, France
57	Electrical properties of aromatic epoxy resins cationically cured by radiation Ranoux Guillaume Université de Reims Champagne-Ardenne, Reims, France
58	Factors influencing the radiation induced polymerization of a multifunctional aromatic epoxy monomer and its network properties for high-performance composite applications Ranoux Guillaume Université de Reims Champagne-Ardenne, Reims, France
59	Cationic Cure of epoxysilicones in the blue light (LED/Halogen) Pibre Guillaume BlueStar Silicones, Saint-Fons, France
60	Microphase separation in photo-cross-linkable block copolymers synthesized by RAFT Tietz Catarina Georg-August Universität, Göttingen, Germany
61	Effects of alcohols on the photosensitized polymerization of cycloaliphatic epoxides in presence of diaryliodonium salt/isopropylthioxanthone system Das Sadananda Université de Reims Champagne-Ardenne, Reims, France
62	Photopolymerization of composite hydrogels for the replacement of the nucleus pulposus Schmocker Andreas Ecole Polytechnique de Lausanne, Lausanne, Switzerland

Site Map | Contact us

September 4th-September 7th 2012 Torino, Italy

ESPS 2012 PLANNING

POSTER SESSION

September 4th-September 7th 2012
Torino, Italy